Virtualbox, sendfile, and stale data

I recently ran into a strange issue with my development site. The setup is pretty standard: a Virtualbox VM and an nginx reverse proxy to it from my host. While building a resource server (CSS and JS) that would automatically build minified files, I ran into an issue where the first few characters of a JS file would be from the old file and the rest from the new file.

I had a try_files directive that would try to serve the files if they existed, otherwise reverse proxy to my node.js application that built and streamed them. The files were factored into two JS files: a common and page level file. As more requests to pages are triggered, the common file would change because there are more files to factor out common resources. Anyways, the first few bytes/characters of the common file would be messed up.

Not really sure what was going on, I found some indications that there could be issues with sendfile in my Virtualbox. Lo and behold, adding sendfile off; to my nginx config fixed the issue.

Vagrant file sharing: Virtualbox vs libvirt

Using virtual machines to replicate a production environment on a development machine is an important aspect of our development environments at my work. On my own projects, it of course allows me to do the same, but for different clients without complicating my host. Vagrant has become an indispensable tool in managing those VM’s and their configuration. There are, although, downsides to spinning up VM’s to serve your website. Sure, CPU and memory intensive tasks likely don’t perform as well on a VM as they do the host, but that’s not a downside most are concerned with. If you’re like me, it’s disk performance that you’re concerned with, and in particular sharing files between the host and the guest VM.

Research and VirtFS
If you search the internet regarding file sharing performance with virtual machines or vagrant in general, you’ll find articles, opinions, and a few benchmarks. You might find an article by Mitchell Hashimoto, the creator of Vagrant, comparing filesystem performance in virtual machines. He compares Virtualbox shares (using vboxsf), VMware shares (using vmhgfs), NFS with Virtualbox, and native performance on both Virtualbox and VMware virtual machines which would be representative of an rsync approach to file sharing with the guest. In your search, you may also find some sources saying that VirtFS is the fastest sharing mechanism available. This page describes VirtFS as “a new paravirtualized filesystem interface designed for improving passthrough technologies in the KVM environment.” VirtFS uses a protocol called 9P developed with Plan 9, and is based on the VirtIO framework. If you want to use 9P file sharing with your virtual machine, you’re going to have to switch from Virtualbox to libvirt. There is a vagrant plugin called vagrant-libvirt which allows you to use the libvirt provider instead of Virtualbox.

Entering the VirtFS Rabbit Hole
The rsync approach to sharing files with a guest VM gives the best performance in my experience. The comparison article above supports my experience. Unlike the other sharing approaches, there are downsides to the rsync approach. First, the rsync approach relies on watching for changes on the host. Second, it can take time for files to rsync from the host to the guest. These may not seem like issues, but with a large web application like we have at my work, we’ve run into issues with file changes not being detected, the rsync watcher breaking, and files actually getting out of sync. In hopes of eliminating those issues, I did some research and found hope in VirtFS. So I installed vagrant-libvirt, made some changes to our Vagrantfile, and decided to give it a try.

Before diving into my testing with 9p, a quick mention about how I tested it. I used the same tool Mitchell used in the article above, Iozone. You can download the latest tarball and compile the tool for your platform. All of this is on 64-bit linux so that would be linux-AMD64. And before you continue, I’m not posting any nice graphs like Mitchell did, mostly because I couldn’t open the document Iozone creates. I will tell you the speeds I observed and how they compared with different options. I also want to clarify that I state the speeds as reported by Iozone, and I use the values only in comparison. Realistic bandwidth performance will likely be different.

Setup Information
The first setup:

  • Fedora 23 host
  • CentOS 6.8 guest
  • Lenovo T540p, Core i5, 16 GB RAM, physical HDD

The second setup:

  • Ubuntu 16.04 host
  • Ubuntu 14.04 guest
  • Dell XPS 15, Core i7, 16 GB RAM, SSD

Testing Setup 1
First thing you should be aware of is that while most Linux flavors will have 9p compiled and enabled in the kernel, CentOS does not. I’m not positive of the reason, but it has something to do with the RHEL team deciding to purposely leave it out, which is not ideal for setting up a libvirt CentOS guest. It is possible, though, to get 9p working in a CentOS guest; you can follow the recommendations in this forum post. After getting a CentOS libvirt guest up and running, I ran Iozone on it. On the “native” filesystem of the guest, it performed similarly to the results in Mitchell’s article. After that, I tried out 9p. This is where my hopes and dreams were destroyed. According to Iozone, bandwidth was rather stable between 100-200 MBps across it’s testing for both read and write. This was fairly disappointing since I was expecting performance closer to the “native” values. After 9p, I decided to test NFS. The NFS read results were very good; much closer to “native.” The write performance, on the other hand, was terrible; much worse than “native” and 9p. For reference, Iozone on a Virtualbox share gave read/write performance of ~300MBps, so it was clear that 9p just wasn’t fast enough. Undetered, I decided to test real performance with our web application. Our home page load time on a Virtualbox machine with rsync sharing was around 400ms. On NFS, the home page loaded around 1 second and on 9p it took around 3.5 seconds. In summary, 9p and NFS just didn’t give the same performance on libvirt as our Virtualbox+rsync setup.

Testing Setup 2
Since 9p wasn’t enabled (or built-in) in Setup 1, I decided to give 9p one more chance given the good opinions of it online, just to be sure. In short, nothing was different. In fact, despite different hardware, Iozone gave similar results of around 100-200 MBps for 9p.

Whatever you do, don’t get committed to converting to 9p. Test it out first, given the time to do so, and ensure the performance meets your needs. For the large web application that we have at my work, it didn’t perform as well as our rsync setup. Going from 400ms to almost 4 seconds for our home page load time is not something we can swallow. I also want to applaud Virtualbox for their vboxsf performing rather well despite not being as “built-in” as VirtFS. If VirtFS can get faster, it will certainly be something to try out again in the future, especially given it’s simplicity and built-in nature in Linux environments. Going forward, I think I might stick with libvirt in place of Virtualbox since the rsync implementation of file sharing is really no different.

Imagination and Quantum Reality

Having taken almost all of the physics classes I need to graduate with my degree in Applied Physics, I feel more than ever a strong pull towards the theoretical field. Something that has always comforted me is my imagination. As a kid, I was content playing by myself, because my imagination entertained me enough. Now, my imagination, although not as active as it once was, still surprises me.

While watching a television show on Netflix, there was a time lapse scene of a bridge over a bay at night. The suspension bridge had lights periodically along its supports, and the reflection of those lights upon the surface of the water flickered and moved relative to the waves and ripples on the water. It reminded me of the wave nature of particles and uncertainty in quantum mechanics. The effects we observe at the quantum level seem to almost be effects of a reality that is outside of our three dimensional world. To break free of the boundaries that contain our thoughts in this physical realm, we must fall whimsically into the depths of our imaginations. Our imaginations need inspiration, and we must feed and nurture them to grow and allow us to venture to places unexplored.

Artistry and creativity bring life to our imaginations. Support our artists, our photographers, our directors, and our writers and we may find that we may gain more scientific knowledge than what is theoretically possible.

Client to Client SSH through VPN

Suppose you have an OpenVPN server and have multiple VPN clients, and you would like to SSH from one client to the other?  That is a question I had while setting up my first VPN, and well, I couldn’t find an answer. I incorrectly assumed that since I could see the IP address via nmap that simple client configurations would allow me to SSH to that machine.

Unfortunately, I was spending most of my time in the wrong side of the configuration. I needed to be looking through the server side configuration.  Specifically the line in the OpenVPN server configuration file that reads


Just un-comment that line and you should have no problem SSHing between clients.

Die Radio Die


During my high school years, 7 or 8 years ago, my brother gave me a bunch of music.  One band in particular, I was especially grateful for.  My brother had gotten some music of a band called Die Radio Die or DieRadioDie, we were never sure of the spelling.  I like to think of them as one of the greatest bands that never were.  They made some great music while together, but it didn’t work out.

Anyway, all was good until a year or two later whey my 4th gen iPod with click wheel (didn’t even have a color screen) DIED!  I mean loved the band, but I never wished my iPod’s death.  All of the music my brother had given me on my iPod had disappeared in a few days.  No backups, nothing.

I constantly searched the internet looking for their music.  I implored my brother to see if his old computer still had the music.  But it was truly lost.

Until recently, when I rediscovered the music here!  Here are some of the songs I missed so dearly:

As Soon As Beauty Dies (link)

Backlash, You’re Dead (link)

Caught On Film (link)

Life is Beautiful (link)

Lincoln Logs and Lumberjacks (link)

Lover Left You Bleeding (link)

Murder Me Beautiful (link)

Party Crasher (link)

The Bartender (link)

The Chase (link)

Windy City, Breaking the Tides (link)

The First Web Post

I’m currently a Software Engineer II at

I’ve made numerous website designs and versions of my own website.  I’ve finally decided to go simple and use WordPress (yuck).  But its better than nothing!

The First Physics Post

This is the first physics post on my site.  I’m in my last year at California State University San Marcos, studying Applied Physics.  I’m going to apply to grad school, which means I will be taking the GRE!